|
Simple inverter motor speed controller with built-in run, stop and speed controls. High performance vector inverter to give high torque at low speed. Suitable for a variety of applications such as water pumping, wood working, air conditioning, conveyor belts and countless others. Works from 400V three phase to run a three phase motor up to 8.6A
Motor Power |
4.0kW |
Rated Current |
8.6A |
Control System |
Line Sine Wave Modulation PWM
- VF Constant Torque or VF Reduced Torque |
Output Frequency Range |
0.5 to 360Hz |
Frequency Resolution |
Digital 0.1Hz Analogue Setting
Max. Frequency Divided by 1000 |
Starting Torque |
More than 100% (When Torque
Boost has been set) |
Braking |
20-100% (capacitive feedback
type) |
DC Injection Braking |
Programmable Power, Time and
Frequency Settings |
Speed Reference |
Digital, 0-10V (10K Ohm impedance),
4-20mA (250 Ohm impedance) |
Multi-stage Speed |
16 Programmable Pre-sets |
Output Voltage |
Auto Voltage Regulator (AVR) |
Accel/Decel |
0.1-3000s linear or S-Curve
- 2 Selectable |
Input Terminals |
5 Progammable from 14 Selections |
Output Terminals |
2 Programmable from 5 Selections.
Open Collector 27Vdc 50mA |
Alarm Relay |
Change Over Contact |
Analogue Output |
0-10V Output of Speed or Load |
Protection |
15 Function inc. Earth Fault |
Trip History |
Last 3 trips, total trip log |
PID Control |
Progammable PID Function -
4-20mA / 0-10Vdc Feedback |
Enclosure |
IP20 |
International Standards |
UL, C-UL (CSA), CE and C-Tick
- Complies with EMC & LV Directives |
Click here for a manual.
|
