|
Simple inverter motor speed controller. High performance vector inverter to give high torque at low speed. Suitable for a variety of applications such as water pumping, wood working, air conditioning, conveyor belts and countless others. Works from 200V single phase to run a three phase motor up to 8.0A
Click here for a datasheet.
This inverter DOES NOT come with a keypad. It requires a keypad for any sort of programming. Please see our keypad section.
Motor Power |
1.5kW |
Rated Current |
8.0A |
Control System |
Line to Line Sine Wave PWM |
Output Frequency Range |
0.1 to 400Hz |
Frequency Resolution |
Digital +/-0.01Hz Maximum Frequency.
Analogue +/-0.2% |
Starting Torque |
120% for 30seconds and 150%
for 0.5seconds |
Braking |
Capacitors Included from 110
to 150 sizes - External Resistor Required |
DC Injection Braking |
Programmable Power, Time and
Frequency Settings at Start and Stop |
Speed Reference |
Digital Operator, 0-10Vdc,
-10 to +10Vdc, 420mA, Potentiometer, RS485 Communications |
Multi-stage Speed |
16 Programmable Pre-sets |
Output Voltage |
Same as Rated Input + Auto
Voltage Regulator (AVR) |
Accel/Decel |
0.01-3600s linear or S-Curve
- 2 Selectable |
Input Terminals |
6 Total - 5 Programme from
44 Selections |
Output Terminals |
2 Programmable from 21 Selections
- Relay Volt free Contact |
Alarm Relay |
Change Over Contact - Programmable
with 21 Selections |
Analogue Output |
0-10V Output of Speed or Load |
Protection |
19 Functions
inc. Earth Fault |
Trip History |
Last 3 trips,
total trip log |
PID Control |
Programmable
PID Function - 420mA 0-10Vdc Feedback |
Enclosure |
IP20 |
International Standards |
UL, C-UL, CE
and C-Tick - Complies with EMC and LV Directives |
Click here for a manual.
|
